Intellidyne has developed propietary, microprocessor-based, energy-savings controls that are more effective than other technologies available in the market today. Intellidyne Energy Economizers are easy to install and are guaranteed to reduce the amount of energy needed to run heating, air conditioning and refrigeration systems by at least 10%. UL-listed as ‘energy management equipment’. Intellidyne Energy Economizers not only reduce energy costs, but also energy consumption, human impact on the environment, and natural resources.
Between $249 and $649 monthly
2-year commitment, guaranteed savings!
IntelliCon®Hydronic Heating Economizers
Model
CHW #1210
CHW WI-FI #1211
SYSTEM REQUIREMENTS
- Hydronic Boiler with non-proportional burner
- Input rating greater than 2.5 million BTU / hour
- Fueled by #2, #4 or #6 heating oil, natural gas or propane
- CHW can be used on boilers with an internal coil for domestic hot water
- Wi-Fi enabled CHW sends operational information and settings to your ‘smart’ phone, tablet or PC
TARGET FACILITIES
- Schools, Colleges & Universities
- Hotels and Resorts
- Large Catering Facilities
- Commercial Office Buildings
- Apartment Buildings,
- Garden Apartments
- Residential Cooperatives
- Governmental Buildings
- Other large scale heating systems
TYPICAL SAVINGS
Fuel savings range from 11% to 28% with some documented savings over 50%. The average realized savings for this control is 20.8% in the first year after installation.
Model
LCH #1220
SYSTEM REQUIREMENTS
- Hydronic Boiler with non-proportional burner
- Input rating between 400,000 and 2.5 million BTU / hour
- Fueled by #2, #4 or #6 heating oil, natural gas or propane LCH can be used on boilers with an internal coil for domestic hot water
TARGET FACILITIES
- Schools, Colleges & Universities
- Hotels and Resorts
- Large Catering Facilities
- Commercial Office Buildings
- Apartment Buildings,
- Garden Apartments
- Residential Cooperatives
- Restaurants
- Health clubs
- Governmental Buildings
- Other large scale heating systems
TYPICAL SAVINGS
Fuel savings range from 11% to 38%. The average realized savings for this control is 17.7% in the first year after installation.
Model
LCH #1220
SYSTEM REQUIREMENTS
- Hydronic Boiler with non-proportional burner
- Input rating less than 400,000 BTU / hour
- Fueled by #2 heating oil, natural gas or propane HW+ can be used on boilers with an internal DHW coil
TARGET FACILITIES
- Single family and small multi- family homes
- Apartment Buildings,
- Garden Apartments
- Residential Cooperatives
- Restaurants
- Health clubs
- Other small to mid-sized heating systems or DHW systems
TYPICAL SAVINGS
Fuel savings range from 10% to 22%. The average realized savings for this control is 14.3% in the first year after installation.
Model
LCH #1220
SYSTEM REQUIREMENTS
- Hydronic Boiler with non-proportional burner
- Input rating less than 400,000 BTU / hour
- Fueled by #2 heating oil, natural gas or propane HW+ can be used on boilers with an internal DHW coil
TARGET FACILITIES
- Single family and small multi- family homes
- Apartment Buildings,
- Garden Apartments
- Residential Cooperatives
- Restaurants
- Health clubs
- Other small to mid-sized heating systems or DHW systems
TYPICAL SAVINGS
Fuel savings range from 10% to 22%. The average realized savings for this control is 14.3% in the first year after installation.
IntelliCon®Steam Heating Economizers
Model
CHS #1110
& CHS WI-FI #1112
SYSTEM REQUIREMENTS
- Steam Heating Boiler with non- proportional burner
- Input rating greater than 2.5 million BTU / hour
- Burner must cycle off when set PSI is reached
- Boiler must maintain a minimum operating pressure of 1.5 psi
- Fueled by #2, #4 or #6 heating oil, natural gas or propane
- CHS can be used on boilers with an internal coil for domestic hot water
- Wi-Fi enabled CHS sends operational information and settings to your ‘smart’ phone, tablet or PC
TARGET FACILITIES
- Schools, Colleges & Universities
- Hotels and Resorts
- Large Catering Facilities
- Commercial Office Buildings
- Apartment Buildings,
- Garden Apartments
- Residential Cooperatives
- Health Care / Assisted Living
- Governmental Buildings
- Other large scale steam heating systems
TYPICAL SAVINGS
Fuel savings range from 12% to 23% with some documented savings over 50%. The average realized savings for this control is 19.0% in the first year after installation.
IntelliCon®Forced Air Heating Economizers
Model
FA #3300
SYSTEM REQUIREMENTS
- Warm air furnace with non-proportional burner
- Single stage burners and some two stage burners
- Input rating up to 400,000 BTU / hour
- Fueled by #2 heating oil, natural gas or propane
- Up-flow, counter-flow or horizontal discharge systems
- Unit heaters
TARGET FACILITIES
- Single & small multi-family homes
- Health Care facilities
- Restaurants
- Convenience Stores
- Shopping Malls
- Health clubs
- MFG and warehouses
- Other small to mid sized forced air heating systems
TYPICAL SAVINGS
Fuel savings range from 10% to 18%. The average realized savings for this control is 13.4% in the first year after installation.
IntelliCon®Cooling Economizers
Model
AC #3400
SYSTEM REQUIREMENTS
- Package or split AC systems with compressors rated between 1.5 and 4 tons
- Reciprocating or scroll type compressors
- Hermetic or semi-hermetic style compressors
TARGET FACILITIES
- Single family homes and condos
- Small office buildings
- Hotels with PTAC units
TYPICAL SAVINGS
Electricity KWH savings range from 10% to 19%. The average realized savings for this control is 13.5% in the first year after installation.
Model
AC #2400
SYSTEM REQUIREMENTS
- Commercial package or split AC systems with compressors rated 4 tons or larger
- Can be used on multi-stage systems
- Reciprocating or scroll type compressors Hermetic or semi-hermetic style compressors
TARGET FACILITIES
- Schools, Colleges & Universities
- Hotels and Resorts
- Convenience Stores
- Commercial Office Buildings
- Apartment Buildings
- Health Care / Assisted Living
- Family & Fast Food Restaurants
- Health clubs
- Governmental Buildings
TYPICAL SAVINGS
Electricity KWH savings range from 10% to 28%. The average realized savings for this control is 16.3% in the first year after installation.
Model
SYSTEM REQUIREMENTS
- Package thru the wall systems with compressors rated between 1.5 and 4 tons
- Reciprocating or scroll type compressors
- Hermetic or semi-hermetic style compressors Compatible with heat pumps
TARGET FACILITIES
- Single family homes and condos
- Small office buildings
- Hotels with PTAC units
- Assisted living facilities
TYPICAL SAVINGS
Electricity KWH savings range from 10% to 19%. The average realized savings for this control is 13.5% in the first year after installation.
Model
RU#2500
SYSTEM REQUIREMENTS
- Commercial refrigeration systems with compressors rated 1.5 HP or larger
- Reciprocating or scroll type compressors
- Hermetic or semi-hermetic style compressors
TARGET FACILITIES
- Cafeterias
- Refrigerated Warehouses
- Convenience Stores
- Restaurants / Catering
- Mid-sized to large food / produce storage facilities
- Small Food stores with glass door and open front display cases
TYPICAL SAVINGS
Electricity KWH savings range from 10% to 28%. The average realized savings for this control is 16.3% in the first year after installation.
